Paul Butler

Surface Projection

By Paul Butler – December 16, 2017

This post is also available as a Jupyter notebook. You can download it or run it on Binder or Colaboratory.

Introduction¶

A surprisingly wide variety of interesting-looking vector line graphics can be generated with a fairly simple technique.

First, we take a bunch of lines. These lines work best if they represent a pattern with some regularity, so I call them the texture. Then, we pick a surface, which is essentially an elevation map represented by a matrix of heights. It can be generated mathematically or taken from real data. Next, we map the texture onto the surface, and capture the heights along all each line to add a third dimension to those lines. Finally, project the result to convert the 3D lines back into 2D lines. If we're lucky, these lines will be more interesting to look at than the texture we started with.

We'll use penkit's show_layer function for displaying plots within the notebook, so if the following code throws an ImportError, try running pip install penkit in a terminal.

In [1]:
%matplotlib inline
import matplotlib.pyplot as plt
from penkit.preview import show_layer
import numpy as np


Generating a Texture¶

Let's begin by generating a texture. As I mentioned, a texture is just a set of lines.

For the first texture we'll take inspiration from the band Joy Division's famous Unknown Pleasures album cover. Joy Division-inspired plots have become a genre in their own right, sometimes called joy plots

The texture in this case is simply a bunch of evenly-spaced horizontal lines. To simplify the math later on, it is helpful to constrain texture coordinates such that both dimensions are in the range [0, 1]. If you try generating your own (and I encourage you to!), make sure they are within this area (you might find penkit.textures.util.fit_texture helpful).

In [2]:
def make_joy_texture(num_lines=10, resolution=50):
# np.meshgrid is a handy way to generate a grid of points. It
# returns a pair of matrices, which we will flatten into arrays.
# For the x-coordinates, we put a nan value at the end so that when
# we flatten them there is a separater between each horizontal line.
x, y = np.meshgrid(
np.hstack([np.linspace(0, 1, resolution), np.nan]),
np.linspace(0, 1, num_lines),
)

# For coordinates where the x value is nan, set the y value to nan
# as well. nan coordinates represent breaks in the path, indicating
# here that the pen should be raised between each horizontal line.
y[np.isnan(x)] = np.nan
return x.flatten(), y.flatten()


Note that we represent all of the lines in two same-sized arrays: one of x-coordinates, and one of y-coordinates. Each coordinate pair creates a line from the previous coordinate pair, unless either contains a nan ("not a number") indicator, which represents a gap in the path. All coordinates are absolute, i.e. vectors from the origin rather than relative to the previous point. If you would like a more gradual introduction to this way of representing lines, see my Fractal Generation with L-Systems tutorial.

In [3]:
joy_texture = make_joy_texture(6)


We can use show_layer to preview the texture:

In [4]:
show_layer(joy_texture)

Out[4]:

If you count the lines, there are six of them, which is the parameter we passed as num_lines. You might have also noticed the optional resolution parameter and wondered why it matters. The lines above are actually made up of a bunch of line segments, and the number of these segments is the resolution. We can use matplotlib to make it clear where the line segments are.

In [5]:
plt.plot(*make_joy_texture(10, 5), marker='.');


Try modifying the parameters to make_joy_texture to check your understanding. The resolution doesn't make a difference when we plot the texture, but soon we will be bending the texture into curves. The higher the resolution, the more accurate the curves will be.

Generating Surfaces¶

Blurred Noise Surface¶

A surface is essentially just a matrix of numbers that we can interpret as elevations. One way to generate interesting surfaces is to generate random noise and blur it.

In [6]:
from scipy.ndimage.filters import gaussian_filter

# This step isn't necessary, but it ensures that the same "random" plot
# will be generated every time the tutorial is run.
np.random.seed(int('banana', 36))

NOISE_BLUR = 40
noise_surface = gaussian_filter(np.random.normal(size=(500, 500)), NOISE_BLUR)


Surfaces can also be visualized with matplotlib, but we need to use imshow rather than plot. Lighter pixels represent points with higher elevations.

In [7]:
plt.imshow(noise_surface, cmap='gray');


"Hole" Surface¶

Another way to generate a surface is to run a mathematical function over the x and y coordinates. To do this easily in numpy, we can generate a pair of matrices:

In [8]:
SURFACE_SIZE = 500
grid = np.meshgrid(
np.linspace(0, 1, SURFACE_SIZE),
np.linspace(0, 1, SURFACE_SIZE)
)


These matrices represent smooth gradients along the horizontal and vertical axes, respectively. These will be the "raw ingredients" to our process. We can apply different functions to them to get different effects.

In [9]:
_, (p1, p2) = plt.subplots(1, 2)
p1.imshow(grid[0], cmap='gray')
p2.imshow(grid[1], cmap='gray');


Standard graphing functions, like sin, can be generalized into 3D by converting the (x, y) values into a scalar and calling sin() on that. The natural transformation into a scalar is the norm, i.e. the distance from the origin.

Note that the x and y values are scaled between 0 and 1, rather than being the raw pixel coordinates.

In [10]:
hole_surface = np.sin(
np.linalg.norm((np.array(grid) - 0.5) * np.pi, axis=0))

In [11]:
plt.imshow(hole_surface, cmap='gray');


Bubble Surface¶

Another fun math function involves taking the product of the sine of both axis. It comes out looking like a grid of bubbles, so I call it the bubble_surface.

In [12]:
NUM_BUBBLES_PER_SIDE = 3
bubble_surface = (
np.sin((grid[0] - 0.5) * NUM_BUBBLES_PER_SIDE * np.pi) *
np.sin((grid[1] - 0.5) * NUM_BUBBLES_PER_SIDE * np.pi))

In [13]:
plt.imshow(bubble_surface, cmap='gray');


Applying the Texture¶

Now that we have a surface, we can map it to the texture. First we strech the texture over the surface dimensions. Then, for each point in the texture, we find its associated pixel on the surface and look up the "elevation" at that point. That elevation becomes the Z-value for the texture. We can think of these Z-values, combined with the original X and Y values, as making up a 3D version of the original texture.

In [14]:
def texture_map(texture, surface):
texture_x, texture_y = texture
surface_w, surface_h = surface.shape

# First, we convert the points along the texture into integers within
# the bounds of the surface's index. The clipping here will also convert
# the nan values to 0.
index_x = np.clip(np.int32(surface_w * texture_x), 0, surface_w - 1)
index_y = np.clip(np.int32(surface_h * texture_y), 0, surface_h - 1)

# Grab z-values along the texture path. Note that this will include values
# for every point, even if it is nan or had to be clipped to within the
# bounds of the surface, so we have to fix that next.
surface_z = surface[index_x, index_y]

# Set z-values that are either out of bounds or nan in the texture to nan
# in the output.
# Numpy wants to warn about the fact that there are nan values in the
with np.errstate(invalid='ignore'):
surface_z[(texture_x < 0) | (texture_x >= 1) |
(texture_y < 0) | (texture_y >= 1)] = np.nan

return surface_z


To actually plot this 3D shape, we need to project it back to 2D. There are different ways to do this, but one way is to preserve the X coordinates, and use a linear blend of the Y and Z coordinates as the Y coordinates. Here's a function that handles both the mapping (by calling texture_map) and projection.

In [15]:
def texture_plot(texture, surface, angle=45, **kwargs):
# Extract the Xs and Ys from the texture
surface_x, surface_y = texture

# Map the texture to get the Zs
surface_z = texture_map(texture, surface.T)

# The projection is as simple as linearly blending the Z and Y
# dimensions. The multiples are calculated from the given
# angle with standard trig.
plot = (surface_x, -surface_y * y_coef + surface_z * z_coef)

return show_layer(plot, **kwargs)

In [16]:
texture_plot(make_joy_texture(20), bubble_surface * 0.1, 40)

Out[16]:
In [17]:
texture_plot(make_joy_texture(40), noise_surface * 12, 40)

Out[17]:

In both examples above, I've applied a scale to the surface by multiplying a number to the surface. Try modifying the multipliers and see what happens. Also, try modifying the angle parameter to other numbers between 0 and 90.

Dark Side of the Surface¶

You may have noticed that in the plot above, some of the lines cross each other. This gives the impression that the surface is transparent, as if we can "see through" it to lines behind the surface. In order to make images that look 3D, we can make the surface appear opaque by not drawing lines that would be obscured by the surface.

One way to do this is by "masking" the visible parts of the surface. First, we apply the projection to the surface. Then, we walk over the surface keeping track of the maximum height as we go. Only the parts of the surface where the height of the sloped surface is equal to the (cumulative) maximum are kept.

To understand this, consider a two-dimensional version below. The lines of sight are parallel, because we are using an axonometric projection. In this example, the lighter-colored parts of the surface would be masked out because they are hidden to the observer. If you trace the line left to right, you can see that points along the line are only visible if no point left of them is higher. In other words, they are equal to the cumulative maximum point.

The same principle applies for our surfaces, but we have to do it for every cross-section of the surface. Fortunately, matplotlib has a function np.maximum.accumulate that calculates a cumulative maximum over every slice at once. By comparing the cumulative maximums to the actual elevation, we can determine the visibility of each pixel on the surface. The result of this function is a mask that tells us which pixels of the surface are visible.

In [18]:
def make_visible_mask(surface, angle):
s = surface.shape[0]

# Just as in projection, we calculate the Y and Z
# coefficients with sin/cos.

# Rotate the surface so that the visibilty mask represents
# the visibility at the desired angle.
projected_surface = (
z_coef * surface -
y_coef * np.expand_dims(np.linspace(0., 1., s), axis=1)
)

# Calculate the cumulative maximum along each cross-section of
# the projected surface. We flip on the input and output because
# we want to accumulate from the bottom of the surface up, rather
# than the top-down. This is because we interpret the bottom of
# the surface as closer to the observer.
projected_surface_max = np.flipud(np.maximum.accumulate(np.flipud(projected_surface)))

# Compare each point on the surface to the cumulative maximum
# along its cross-section.
return projected_surface == projected_surface_max


To apply the mask, we can set all values of the surface that are not in the mask to nan.

In [19]:
def remove_hidden_parts(surface, angle):
surface = np.copy(surface)
return surface


The input and output of this process, as well as the mask used, are shown below.

In [20]:
_, (i, m, r) = plt.subplots(1, 3)
# Plot input surface
i.imshow(bubble_surface, cmap='gray')
i.set_title('input')
i.axis('off')
m.axis('off')
# Plot result
r.imshow(remove_hidden_parts(bubble_surface, 10), cmap='gray')
r.set_title('result')
r.axis('off');


Putting it all together, we can apply remove_hidden_parts to a surface and get the result we want.

In [21]:
angle=70
texture_plot(make_joy_texture(50, 100), remove_hidden_parts(bubble_surface * 0.1, angle), angle)

Out[21]:
In [22]:
angle=65
texture_plot(make_joy_texture(80, 100), remove_hidden_parts(
hole_surface * 1.2 + noise_surface + bubble_surface * 0.1, angle), angle)

Out[22]:

Grids¶

Now that we have seen how projection works, let's explore some more interesting textures. If we swap the X and Y dimensions, our horizontal lines become vertical lines. By concatenating the vertical and horizontal lines, we can make a grid texture.

In [23]:
def make_grid_texture(num_h_lines=10, num_v_lines=10, resolution=50):
x_h, y_h = make_joy_texture(num_h_lines, resolution)
y_v, x_v = make_joy_texture(num_v_lines, resolution)
return np.concatenate([x_h, x_v]), np.concatenate([y_h, y_v])

In [24]:
show_layer(make_grid_texture())

Out[24]:

Let's use penkit's rotate_texture function to play with the grid.

In [25]:
from penkit.textures.util import rotate_texture, fit_texture
grid_texture = fit_texture(rotate_texture(make_grid_texture(40, 40, 200), 40))


Just as we scaled surfaces before by multiplying them by a scale factor, we can combine them by adding them. Let's combine all of the surfaces we've seen and map a grid texture to them. Try changing some of the values and seeing how the plot changes.

In [26]:
angle = 30
texture_plot(grid_texture, remove_hidden_parts(
0.1 * hole_surface + 16 * noise_surface + 0.1 * bubble_surface, angle), angle)

Out[26]: